High Performance Mineral Crankcase Engine Oil
Xtreme S10 10W-30 is an advanced SAE 10W-30 multigrade engine oil, designed to counter the toughest conditions found in petrol and diesel engines where high temperatures and pressures prevail. It has a high level of wear protection and provides superior engine cleanliness at extended drain intervals.
Xtreme S10 10W-30 has been specially formulated to minimise the effects of high and low sulphur fuels and to ensure that the alkalinity reserve is maintained during extended service. The harmful effects of high sulphur levels in diesel fuel contribute to the increased formation of varnish, lacquer and carbon in the critical ring grooves resulting in higher wear rates, which could necessitate premature engine overhaul and higher maintenance costs.
Xtreme S10 10W-30 has been specially formulated to minimise the effects of high and low sulphur fuels and to ensure that the alkalinity reserve is maintained during extended service. The harmful effects of high sulphur levels in diesel fuel contribute to the increased formation of varnish, lacquer and carbon in the critical ring grooves resulting in higher wear rates, which could necessitate premature engine overhaul and higher maintenance costs.
Xtreme 10W-30 is uniquely designed for use in all Toyota common rail diesel engines which must use a SAE 10W-30 API CF-4 performance level engine oil.
Being an SAE 10W-30 multigrade oil, it is suitable for use over a wide operating temperature range with the added advantage of being fuel efficient. A unique additive package prevents corrosion, high temperature oxidation and low temperature ‘sludging’; while a highly shear stable viscosity modifier minimizes viscosity change caused by changing temperatures.
| ENGEN XTREME S10 10W-30 | |||
| PARAMETERS | METHODS | UNITS | TYPICAL RESULTS |
| SAE No. | - | - | 10W-30 |
| Viscosity @ 40°C | ASTM D445 | cSt | 76 |
| Viscosity @ 100°C | ASTM D445 | cSt | 11.5 |
| Viscosity Index | ASTM D2270 | - | 143 |
| Flash Point | ASTM D92 | °C | 220 |
| Pour Point | ASTM D5950 | °C | -30 |
| Total Base No. | ASTM D2896 | mgKOH/g | 7.3 |
| Sulphated Ash | ASTM D874 | % m/m | 1.3 |
All technical data is provided for reference only. These characteristics are typical of current production. Whilst future production will conform to Engen’s specification, variations in these characteristics may occur.
Meets or exceeds the following Industry Standards:
This product is unlikely to present any significant health and safety hazards when used in the recommended application. Avoid contact with skin. Wash immediately with soap and water after skin contact. Do not discharge into drains, soil or water. For further detail regarding storage, safe handling, and disposal of product, please refers to product SDS. Safety Data Sheets are available for all our products and should only be consulted for appropriate information regarding storage, safe handling and disposal of the product.
No responsibility shall be taken by either Engen or its subsidiaries and related holding corporation for any loss or injury or any direct, indirect, special, exemplary, consequential damages or any damages whatsoever, whether in action of contract, negligence or other tortuous action, in connection or resulting from abnormal use of the materials and/or information, from any failure to adhere to recommendations, or from hazards inherent in the nature of the materials and/or information. All products, services and information supplied are under our standard conditions of sale. Please consult with any of our local representative in the event you require any further information.